aluminium box canopy

KV 200 - the "bauhaus style" is back

Clear, straight lines and shapes that focus on the essentials are making an impressive comeback. The classic aluminium box canopy is being rediscovered. Whether old buildings with a matching look or new buildings with cubic designs, with our new KV 200 canopy we won't leave you and your visitors out in the rain. Like all KOMPOtherm® KV canopies, the new canopy is characterised by a water channel that is invisibly integrated into the roof.

Drainage takes place via the newly developed water spout, which can be fitted in the required position. Another bright idea in these models is the integrated lighting in the underside view. The new installation solution, specially developed for the often difficult attachment to modern full thermal plaster, will delight construction managers.

Powder-coated aluminium and the new mounting solution allow sizes of 1200 x 2500 mm - naturally, as always with KOMPOtherm®, with static verification. A canopy in the same colour as the front door is also a matter of course for us. We show you a KV 200 canopy in L-combination with a multifunctional side panel with integrated letterbox, doorbells and intercom system in trendy colour combinations of grey and reclaimed wood look.

Merkmale

  • Vordach aus einer pulverbeschichteten Aluminium-Konstruktion mit einer Blendenhöhe 200 mm
  • obere Abdeckung mit Wasserführung aus Aluminium und Antidröhn-Beschichtung
  • Wasserspeier aus Aluminium links oder rechts möglich
  • bei Verwendung eines Seitenteiles wird der Wasserablauf unsichtbar durch das Seitenteil geführt
  • Unteransicht aus Aluminium, auf Wunsch mit Beleuchtung und farblich abgesetzt möglich
  • Seitenteil, links oder rechts, kann mit Briefkästen, Klingeln und Sprechanlagen bestückt werden

Aluminium Canopies

These canopies are custom-made, so they are particularly suitable for covering old concrete canopies. They can also be attached to any wall surface using support arms. A concealed gutter is hidden in the roof of these welded aluminium constructions. Water can flow forward through this channel and then be ejected through the spout or directed to the downpipe along the wall.

 

Recessed spotlights can be fitted to the base of the grooved-look aluminium plate to illuminate your house entrance. It is also possible to colour code the base and decorative trim for type KV 360. Choose your preferred shade from our 14 standard colours or from the entire RAL range. Unfortunately, wood décor surfaces are not possible for these canopies due to technical reasons.

Aluminium Canopies

These canopies are custom-made, so they are particularly suitable for covering old concrete canopies. They can also be attached to any wall surface using support arms. A concealed gutter is hidden in the roof of these welded aluminium constructions. Water can flow forward through this channel and then be ejected through the spout or directed to the downpipe along the wall.

Support arm design, e.g. canopy type KV 360. The number of support arms depends on the size of the canopy (without attachments).

Optionally available in casement design, e.g. canopy type KV 360. In this case, the panel connecting with the wall is cut to match the size of the existing concrete canopy and then pushed over the canopy.

Water spout on the left or right

Water drainage connector on the left or right
Optionally with a downpipe beside the wall.

View from below, with slotted plate

Canopies Collection

We won’t abandon you when it rains!

The canopies catch the eye with their light and modern design and the large number of variants using the same wall connection, cantilever and gutters. Depending on the model, the gutters are available in large or small versions. Bracket variations for beneath or to the side of the roof are also possible, as well as models with tension rods. Each canopy can be optionally equipped with an LED lighting strip. Side rain guards and wind breaker panels are available as well.

Glass Canopies Variants

  • Aluminium structure made of AlMgSi0,5F22
  • All connectors, bolts and pins are made of stainless steel
  • End pieces and caps made of cast aluminium
  • Roof cover made of real glass 10 mm LSG
  • Roof incline 15°
  • Aluminium gutter on both sides for roof drainage; large or small gutters available, depending on the model
  • 14 standard colours
  • Full RAL selection, fine texture and wood décor possible
  • Stainless steel wall connectors for the brackets
  • Projection of 800 to 1400 mm, depending on the model; grid 200 mm
  • Widths of 1280 to 3200 mm, depending on the model; grid 320 mm
  • All wall connection profiles are fitted with a lighting channel to enable retrofitting of LED lamps
  • Lighting channel cover made of UV-resistant acrylic satin with satin finish
  • Each canopy can be optionally equipped with LED lighting. In standard grid dimensions, cold or warm white diodes are always fitted to the lighting channel across the entire width of the canopy
  • A concealed transformer can be mounted in the wall connection profile
  • The wall connection profile is suspended in place for easy assembly

Glazing Variants

  • Legeda

    Features

    • Aluminium and glass canopy with straight brackets made of 25 mm round tube, mounted on the cantilever below the roof and toward the wall
    • Projection of 800 mm, 1000 mm, 1200 mm and 1400 mm
    • Widths from 1280 mm to 2560 mm; grid 320 mm
    • with large gutter
    • Brackets based on structural requirements
  • Zugeda

    Features

    • Aluminium and glass canopy with straight tension rods made of 25 mm round tube, laterally mounted on the glass support profile and toward the wall
    • Projection of 800 mm and 1000 mm
    • Widths from 1280 mm to 2240 mm; grid 320 mm (additional widths available soon)
    • With small gutter
    • Brackets based on structural requirements
  • Zulegro

    Features

    • Aluminium and glass canopy with straight tension rods made of 25 mm round tube, mounted on the cantilever above the roof and toward the wall
    • Projection of 800 mm, 1000 mm and 1200 mm
    • Standard widths of 1280 mm to 3200 mm; grid 320 mm
    • Special widths are possible
    • with large gutter
    • Brackets based on structural requirements
  • Falida

    Features

    • Aluminium and glass canopy with two side torches made of 80 mm round tube, laterally mounted on the glass support profile and toward the wall
    • Optionally available with two stainless steel lamp fixtures on the torches
    • Projection of 800 mm and 1000 mm
    • Widths from 1280 mm to 2240 mm; grid 320 mm
    • With small gutter
    • Brackets based on structural requirements

Your contact at KOMPOtherm®

We will gladly assist if you have questions about our front doors, catalogues or your closest dealership: call +49(0)5246/704-0 or email us at kontakt@kompotherm.de